Solutions for the A-10 (Core DASH System)

Camera:

Transport (with Camera installed):

(1420-HC-CM-02)

(1420-HC-XP-02)
→Integrated w/ the Transport, the Camera
→Integrated w/ the Camera, the Transport
measures position, line width and brightness
contributes to the measurement of position.
→The internal focus transport moves the
→The transport's 2 motor/disc assemblies
camera's photo-diode matrix detector, which
control the horizontal and vertical movement
enables manual and auto focus capabilities
of the camera
→The Camera is equipped with two neutral 
→The motor/disc assemblies feature a two-
density filters that enable the Camera to test
motor, anti-backlash design for precise
brighter images without pixel saturation
angular movement

Additional information regarding the Camera

Additional information regarding the Transport

Controller:

Standard System:

(1420-HC-IS-02)

(1420-HC-SD-02)
→The Controller's custom hardware and  
→The Controller and Transport/Camera
firmware enables the user to send commands
are connected by the DASH Cable, which
 and receive feedback from the DASH system

enables communication between the modules
→Commands running into and data flowing
→The Accessory Cable connects the Core
out of the DASH system are handled by the
DASH System to Alignment Tools, which 
Controller's RS232 and GPIB buses

automatically align the system upon start-up
→The Controller’s firmware can be easily
→Factory calibration data held in the Camera,
upgraded thru the capabilities of EPROMs
Transport and Controller is used to compensate

Additional information regarding the Controller
 for variations in movement, focus and exposure

BACK TO Solutions for the A-10

 

Copyright © 2016 Spectron Engineering Inc