Spectron Engineering - Solutions for the A-10 (DASH Accessories)

Solutions for the A-10 (DASH Accessories)

Luminance Transfer Standard:

Light Shroud:

(1420-OMS-LTS-02)

(1420-OMS-LS-01)


	→The Luminance Transfer Standard mounts


→The Light Shroud provides an

	on top of the Boresight Reference Tool

environment void of ambient light, which

→The Luminance Transfer Standard

could affect the results of display testing

confirms the accuracy of the Camera’s

→The Light Shroud screws into the Boresight

measurement of the brightness of the

Bench and unfolds to cover the Camera

displays being tested

and the A-10 HUD


	→Luminance constants control the Camera’s

→The articulating, “covered wagon” design

measurement of brightness and are updatable,

allows the Light Shroud to be quickly and

	as they are held in the Camera's EEPROMs

easily installed when a dark testing area is needed

DASH Cable:

Accessory Cable:

(OMS-W01)

(OMS-W02A)


	→The DASH Cable connects the DASH


→The Accessory Cable provides power to

Controller to the DASH Camera / Transport

the Boresight Reference Tool and the


	→Each 100 pin connector on the DASH

Luminance Transfer Standard

	Cable is keyed to ensure proper insertion

→The Accessory Cable runs between the

→The DASH Cable connectors also feature

Transport & one of the instruments above, pulling

a quarter-turn locking mechanism, which

power from the Controller's power supply

protects the pins during insertion and also

→The Accessory Cable also carries data in the

	secures the connector cover when not in use

opposite direction from the instrument's

	Additional info on the DASH Cable

EEPROMs back to the Core DASH System